Mbs Standoffs does not recommend painting the standoffs since they are already processed for their finish at our production facility. We have had customer who have painted out products with a third party but there will be no returns accepted if it doesn’t work.
The 1/16” stainless steel cable can support up to 50 lbs. not including the mounting hardware. The 1/8” cable can support up to 100 lbs. per cable not including the mounting hardware.
Each standoff is rated for 18lbs per and that is not including how it is being mounted. If the product is mounted properly there will be a greater supported weight. Please refer to the data sheets provided with the anchors for drywall and concrete.
The cable and rod systems are best used indoors. We do not recommend that they be used outside.
All installations are pretty simple and straightforward. It usually just involves marking your mounting surface, drilling the holes for the mounting hardware and mounting the signage and/or art. If there is additional information or instructions a Sales Representative can assist you by phone at 813-938-6025 or by email at sales@mbs-standoffs.com. We also have installation videos and guides available on our website.
The amount of time required to install your project determines on how handy the installer is and how extensive the project is. It can take anywhere from 10 minutes and above to install.
To install most of our products you would need a drill, drill bit, and screw driver. It would be recommended that a level is utilized to ensure proper and level mounting.
All of our rails and tracks come in 72” or 6ft length.
The classic rail is designed to be mounted to the wall and the ceiling rail is designed to be mounted to the ceiling at the corner where the wall meets.
The hardware needed to use the art hanging systems includes the rail, the hanging cables, cable hooks, and the mounting hardware for the rails.
