Stainless Steel Cable 1/16'' (7x7) x 9' 10'' Maximum weight supported: 55 lbs (25 kg) | MBS Hanging

Stainless Steel Cable 1/16'' (7x7) x 9' 10'' Maximum weight supported: 55 lbs (25 kg)

Product 1

Stainless Steel Cable 1/16'' (7x7) x 9' 10'' Maximum weight supported: 55 lbs (25 kg)

SKU: 100.383
Unit Price$4.91
Quantity Price Each (USD)
1-99 $4.91
100-501 $4.66
500+ $4.42
1000+ Contact Us
 
Select Length (W/out Rod):

Stainless Steel Cable 1/16'' (7x7) x 9' 10'' Maximum weight supported: 55 lbs (25 kg)

SKU: 100.383
Stainless Steel Cable 1/16'' (7x7) x 9' 10'' Maximum weight supported: 55 lbs (25 kg)
Description:
Our Stainless Steel Cables are the backbone of a strong and beautiful Display System. It is a vital part to a functional system and has a beautiful finish to match your Cable System perfectly. The combination of many high quality parts like this is what gives our Display Systems the ability to become extremely versatile and provides an application for nearly any situation you can imagine! If you look below you will notice technical descriptions about this particular item.

Stainless Steel Cable 1/16'' (7x7) x 9' 10'' Maximum weight supported: 55 lbs (25 kg)

SKU: 100.383
Sku 100.383
Finish Natural
Inside/Outside Inside Use Only
Material Stainless Steel
Diameter 1/16''
Length 118'' (3 m)
Washer Not Needed
Rated Strength 55 lbs (25 Kg) per Steel Cable (When Properly Installed)
Application Cable
Installation

The installation process is very easy!
First, mark where you will be hanging your wall, ceiling, or floor mounts.
Then, drill any necessary holes and install your anchors.

If you are installing a Ceiling Suspended System, then your cable will thread through the ceiling mount before you screw the Ceiling Mount into its base.
If you are installing any other system, then the cable will be threaded into both the Cable Tensioner and the Ceiling mount and then tightened down.

Now that you know how your cable is attached, install the upper and lower mounts to your surface.

If you are installing a Ceiling Suspended System, this will be your Ceiling Mount.
If you are installing a Wall Mounted System, you will install the Vertical Assembly Arm(s) and then attach the Cable Tensioner and/or Ceiling Mount into the Vertical Assembly arm.

Don't forget - your cable should be installed between the Cable Tensioner/Vertical Assembly Arm and your surface.

Cut can excess cable, make sure your set screws are tightened securely.
All that's left is to hang your material, tighten the set screws, and enjoy your beautiful display!

Installation Hardware None
Tools Required None

Stainless Steel Cable 1/16'' (7x7) x 9' 10'' Maximum weight supported: 55 lbs (25 kg)

SKU: 100.383