''Set of 2, Clamp, Aluminum Matte black Anodized Finish, to Accommodate 1'' to 1-1/8'' Counters. Hold up to 1/4'' material thickness M6 Set screw need 3mm Allen Wrench''
| Quantity | Price Each (USD) |
|---|---|
| 1-99 | $29.45 |
| 100-501 | $27.98 |
| 500+ | $26.50 |
| 1000+ | Contact Us |
''Set of 2, Clamp, Aluminum Matte black Anodized Finish, to Accommodate 1'' to 1-1/8'' Counters. Hold up to 1/4'' material thickness M6 Set screw need 3mm Allen Wrench''
SKU: CP175MB
''Set of 2, Clamp, Aluminum Matte black Anodized Finish, to Accommodate 1'' to 1-1/8'' Counters. Hold up to 1/4'' material thickness M6 Set screw need 3mm Allen Wrench''
SKU: CP175MB| Sku | CP175MB |
| Finish | Matte Black Anodized |
| Material | Aluminum |
| Material Grade | 6063 |
| Length | 1-3/4'' |
| Thickness Board Accepted | 1'' to 1-1/8'' |
| Thickness Material Accepted | 1/4'' |
| Installation |
Begin by removing everything from the packaging. Start with a rough layout to determine how far apart each bracket will need to be placed to accommodate your substrate. Grab your substrate and slide in the clamp and clamp, tighten the set screws found on the back, then find the set screws below and tighten to finalize the location of the clamp. Repeat with your next clamp. Finish by ensure all set screws are snuggly tightened. |
| Tools Required | 3mm Allen Wrench |
''Set of 2, Clamp, Aluminum Matte black Anodized Finish, to Accommodate 1'' to 1-1/8'' Counters. Hold up to 1/4'' material thickness M6 Set screw need 3mm Allen Wrench''
SKU: CP175MB''Set of 2, Clamp, Aluminum Matte black Anodized Finish, to Accommodate 1'' to 1-1/8'' Counters. Hold up to 1/4'' material thickness M6 Set screw need 3mm Allen Wrench''
SKU: CP175MB
