Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork | MBS Hanging

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork

Product 1

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork

SKU: CUB250A
Unit Price$61.84
Quantity Price Each (USD)
1-99 $61.84
100-501 $58.75
500+ $55.66
1000+ Contact Us
 
Select Finish:

Clear Anodized

Black Anodized

Raw Material

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork

SKU: CUB250A
Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork
Description:
Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork For an application where holes are not desired or not able to be accomplished, this clamp becomes the perfect option for cubicle partition. With adjustable clamp allowing to grip materials/counters from 1-3/4'' to 2-3/8'' and adjustable set screws on the bottom of the clamp to allow for extra gripping power and stability!

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork

SKU: CUB250A
Sku CUB250A
Finish Clear Anodized
Material Aluminum
Material Grade 6063
Diameter 5/8''
Length 1-9/16''
Thickness Board Accepted 1-3/4'' to 2-3/8''
Thickness Material Accepted 1/4''
Installation

Begin by removing everything from the packaging. Start with a rough layout to determine how far apart each bracket will need to be placed to accommodate your substrate that you would like to put between each rod. Grab the clamp and clamp it on the counter, tighten the 2 set screws found on the side, then find the set screws below and tighten to finalize the location of the clamp/rod. Repeat with your next clamp/rod, choose where to put each of the 2 panel grippers on the rod and slide your substrated into the grippers. Finish by ensure all set screws are snuggly tightened.
Tools Required 2 & 3mm Allen Wrench

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork

SKU: CUB250A

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 1-3/4'' to 2-3/8'' Cubicle partition. Upt to 1/4'' material accepted on the fork

SKU: CUB250A