Options are available for whatever need you have for your sign display. Installing the standoffs are simple, but effective at the same time.
The first step you need to take is to identify where you want to locate your signage. Depending on the wall surface you are mounting to, you will need to drill holes to connect your anchor screws to. Before you drill your holes make sure you have the correct size drill bit to match the size of your anchor screw or bolt and the correct type of drill bit for the surface you will be drilling into. Next you should measure the distance of the locations on the signage of where they will come through. After you have this measurement, mark where they will be and make sure they are level. At this point you can drill your holes for your anchors. Once you have the anchors into the wall, put the threaded end through the sign. Your anchors should be protruding through your sign. Now take the polished caps and attach them to the anchor screws showing.
These directions are very universal. They can apply for all of our systems. There may be slight variances, but they will still apply.
Aluminum material signs make for wonderful indoor signs. If you need to display your sign outdoors, stainless steel signs will tolerate the weather conditions the best.
